Đóng Menu
Máy phát điện Kipor

KDE12STA3

Thông tin sản phẩm

Hãng sản xuất: Wuxi Kipor Power Co., Ltd.
 

Thông tin chi tiết

Strong Power

All generator sets are equipped with KIPOR four-stroke engines.

Low Noise Running

High effective combustion system ensures complete combustion, Besides, a large silencer dampens exhaust noise and engine sounds which are contained by a double-wall structure and absorbed by a liner.

Digital Control Panel

All the control units of the generator sets are on one panel, a monitor of the panel will display the real-time working data of the generator set such as its output voltage and current etc. Besides, the running trouble of the generator will also be displayed on the panel.

Low Oil Alarm System

Before the oil level drops to the limited level, the generator set will stop automatically. The whole set can be restarted only if the oil is refilled.

Application of New AVR 

The AVR (Automatic Voltage Regulator) not only can smooth the output but also can provide reasonable protection against the overload of the whole set, thus avoid damage to the set.

Advanced Alternator Winding

Waveform distortion is kept at a minimum level and the output is stable. The winding design protects the generator from short circuits and provides a stable output while running inductive loads.

ATS (Automatic Transfer Switch)

On the inheriting of the original general-purpose generator set, KIPOR diesel generator sets with digital control panel can be equipped with a made ATS(automatic transfer switch). ATS, in its preset intervals, can automatically check and monitor the running of the genset to ensure the genset in good working condition. Meanwhile, ATS will monitor the utility power, if utility power fails or the voltage and frequency of the utility power become abnormal, ATS will give commands to start the genset automatically.

Model KDE12STA3 Hướng dẫn sử dụng Parts Catalogue
Tần số (Hz) 50     60
Tải tài liệu Tải tài liệu
Công suất liên tục (kVA) 10    11.5
   
Công suất dự phòng (kVA) 11    12.65
   
Điện áp định mức (V)
230/400     240/416
   
Dòng điện định mức (A)
14.5    16
   
Tốc độ quay (r / min)
3000            3600
   
Số pha - Số dây
3 Phase - 4 Dây
   
Hệ số công suất (Cos Φ)
0.8(lag)
   
Cấp cách điện
B    
Số cực từ 2    
Loại kích từ Tự kích từ và ổn định điện áp điện tử (AVR)
   
Model động cơ KM2V80G
   
Kiểu động cơ Động cơ Diezel 4 thì, 2 xy lanh, xếp hình V
   
Đường kính x hành trình piston (mm)  2-80×79
   
Dung tích xy lanh (L)  794
   
 Công suất động cơ (kW) 12.5/3000   14.5/3600
   
 Tỉ số nén 23:1
   
Hệ thống làm mát  Làm mát bằng két nước kết hợp quạt gió
   
Dung tích nước làm mát (L)  3.5
   
Hệ thống bôi trơn  Bơm dầu kết hợp vung té
   
 Dung tích dầu bôi trơn (L) 2.27
   
 Hệ thống khởi động Đề nổ 12VDC
   
Nhiên liệu sử dụng Diesel    
Loại dầu bôi trơn SAE10W-30, 15W-40
   
Công suất động cơ khởi động (V-kW) 12V 1.4kW
   
Nguồn nạp ắc qui (VA) 12V 20A
   
Dung lượng ắc qui(V-Ah) 12V 36Ah
   
Mức tiêu hao nhiên liệu tối đa (g/kW.h) ≤340
   
Dung tích thùng nhiên liệu (L) 26
   
Thời gian chạy liên tục (giờ) 7    
Kích thước (L x W x H) (mm) 1350 x 795 x 850
   
Trọng lượng khô (kg) 310
   
Độ ồn dB(A)/7m 72    
Kết cấu khung – vỏ bọc Vỏ chống ồn đồng bộ, máy có bánh xe
   

Bảng điều khiển: Kỹ thuật số (Digital)

1 - Khóa điện khởi động máy,  Attomat điều khiển và bảo vệ điện áp ra, Đồng hồ báo điện áp, Đồng hồ báo nhiên liệu, ổ cắm đa năng điện xoay chiều 220 V,  cực ra điện áp 220/380 V, và nút dừng khẩn cấp khi có sự cố.

2 - Màn hình kỹ thuật số hiển thị: Điện áp và dòng điện pha, tần số, tổng thời gian chạy máy...các đèn chỉ báo chế độ bảo vệ nếu xuất hiện lỗi (bao gồm: cao/ thấp tần số, điện áp, nhiệt độ động cơ, áp suất dầu bôi trơn, quá tải...). Chức năng SCAN có thể quét kiểm tra liên tục và hiển thị tự động trên màn hình.


0/5
(0 nhận xét)
  • 0% | 0 đánh giá
  • 0% | 0 đánh giá
  • 0% | 0 đánh giá
  • 0% | 0 đánh giá
  • 0% | 0 đánh giá

Chia sẻ nhận xét về sản phẩm

Gửi nhận xét
GỬI ĐÁNH GIÁ CỦA BẠN
Đánh giá
Gửi